新聞中心
新聞資訊
聯系我們
山東途暢路橋工程有限公司
聯系人：石總
電話：18264104888
地址：山東省濟南市槐蔭區經一路273號群盛華城
冷再生租賃適用于什么樣的養護作業？
來源：http://kqj188.com/ 日期：2021-07-23 發布人：
冷再生租賃機主要作業于哪些場合呢？根據銑削形式，銑刨機可分為冷銑式和熱銑式兩種。冷銑式配置功率較大，刀具磨損較快，切削料粒度均勻，可設置灑水裝置噴水，使用廣泛，產品已成系列；熱銑式由于增加了加熱裝置而使結構較為復雜，一般用于路面再生作業。
Where does the cold regeneration rental machine mainly operate? According to the milling form, the milling machine can be divided into cold milling type and hot milling type. The cold milling configuration has large power, fast tool wear, uniform particle size of cutting materials, and can be equipped with sprinkler to spray water. It is widely used, and the products have become a series; The structure of hot milling type is more complex due to the addition of heating device. It is generally used for pavement regeneration.
按銑削轉子的旋轉方向，可分為順銑式和逆銑式兩種。轉子的旋轉方向與銑刨機行走時的車輪旋轉方向相同的為順銑式，反之則為逆銑式。
According to the rotation direction of milling rotor, it can be divided into forward milling type and reverse milling type. If the rotation direction of the rotor is the same as that of the wheel when the milling machine is running, it is forward milling, otherwise it is reverse milling.
根據結構特點，分為輪式和履帶式兩種。輪式機動性好、轉場方便，非常適合于中小型路面作業；履帶式多為銑削寬度2000mm以上的大型銑刨機，有舊材料回收裝置，適用于大面積路面再生工程。按銑削轉子的位置，可分為后懸式、中懸式和與后橋同軸式。后懸式即銑削轉子懸掛于后橋的尾部；中懸式即銑削轉子在前后橋之間；后橋同軸式即銑削轉子與后橋同軸布置。
According to the structural characteristics, it can be divided into wheel type and crawler type. Wheel type has good mobility and convenient transfer, especially suitable for small and medium-sized pavement operation; The crawler type is mostly a large milling machine with a milling width of more than 2000mm, with an old material recovery device, which is suitable for large-area pavement recycling engineering. According to the position of milling rotor, it can be divided into rear suspension type, middle suspension type and coaxial type with rear axle. Rear suspension type, that is, the milling rotor is suspended at the tail of the rear axle; The middle suspension type is that the milling rotor is between the front and rear axles; The rear axle is coaxial, that is, the milling rotor is arranged coaxially with the rear axle.
根據銑削轉子的作業寬度，可分為小型、中型和大型等三種。小型銑刨機的銑削寬度為300~800mm，銑削轉子的傳動方式多采用機械式，主要適用于施工面積小于100M2的路面維修工程；中型銑刨機的銑削寬度為1000~2000mm，銑削轉子的傳動方式多為液壓式；大型銑刨機的銑削寬度在2000mm以上，一般與其它機械配合使用，形成路面再生修復的成套設備，其銑削轉子傳動方式也多為液壓式。
According to the working width of milling rotor, it can be divided into small, medium and large. The milling width of the small milling machine is 300 ~ 800mm, and the transmission mode of the milling rotor is mostly mechanical, which is mainly suitable for pavement maintenance projects with a construction area of less than 100m2; The milling width of medium-sized milling machine is 1000 ~ 2000mm, and the transmission mode of milling rotor is mostly hydraulic; The milling width of large milling machine is more than 2000mm. It is generally used in conjunction with other machinery to form a complete set of equipment for pavement regeneration and repair. Its milling rotor transmission mode is also mostly hydraulic.
根據傳動方式分為機械式和液壓式兩類。機械式工作可靠、維修方便、傳動效率高、制造成本低，但其結構復雜、操作不輕便、作業效率較低、牽引力較小，適用于切削較淺的小規模路面養護作業；液壓式結構緊湊、操作輕便、機動靈活、牽引力較大，但制造成本高、維修較難，適用于切削較深的中、大規模路面養護作業。
According to the transmission mode, it is divided into mechanical type and hydraulic type. The mechanical type has the advantages of reliable operation, convenient maintenance, high transmission efficiency and low manufacturing cost, but its structure is complex, the operation is not light, the operation efficiency is low and the traction force is small. It is suitable for small-scale pavement maintenance with shallow cutting; The hydraulic type is compact in structure, light in operation, flexible in mobility and large in tractive force, but it has high manufacturing cost and difficult in maintenance, so it is suitable for medium and large-scale road maintenance with deep cutting.
下一篇：冷再生機和冷拌瀝青的區別是什么？ 上一篇：冷再生施工租賃成本費用是多少？
推薦閱讀/ Recommended reading
- 撒布精度±5%是怎么做到的？ 2026-07-29
- 水泥撒布車三種類型怎么選？ 2026-07-27
- 水泥撒布車出租基礎知識與核心價值 2026-07-25
- 冷再生機租賃的市場趨勢與未來 2026-07-23
水泥撒布車出租避坑指南先注意這個5點
[2026-07-31]
水泥撒布車出租市場魚龍混雜，租錯了不僅浪費錢，還可能耽誤整個工期。以下5條避坑指南，幫你避開非常常見的“坑”。The rental market for cement spread...
