WR2300E路面冷再生機是WR2300L型路面冷再生的升級型號，機器實現了全電控化操作，實現自動噴水功能，雙方向盤操作，適用于高強度水泥穩定層的路面冷再生施工。

The WR2300E road surface cold regeneration machine is an upgraded model of the WR2300L road surface cold regeneration. The machine realizes fully electronic control operation, automatic water spraying function, dual steering wheel operation, and is suitable for cold regeneration construction of high-strength cement stabilized layers.

●·康明斯KTA19-C600柴油發動機，額定功率600馬力，適應國內柴油，動力強勁，功率貯備大，可靠性高，維護保養方便;●·可靠的散熱系統，夏季發動機不高溫，液壓油溫不超過60度，泵馬達始終處于工作溫區;

Cummins KTA19-C600 diesel engine with a rated power of 600 horsepower, suitable for domestic diesel, strong power, large power reserve, high reliability, and convenient maintenance; ● Reliable heat dissipation system, the engine is not hot in summer, the hydraulic oil temperature does not exceed 60 degrees, and the pump motor is always in the working temperature zone;

●·液壓系統采用德國薩澳丹佛斯( Sauer Danfoss）系統，可靠性高;

The hydraulic system adopts the Sauer Danfoss system from Germany, which has high reliability;

●轉子驅動采用美國原裝大扭矩減速機，轉子轉速設有三個工作擋，可跟據工況要求，調整銑刨鼓轉速，在滿足破碎粒度要求的同

The rotor drive adopts an American original high torque reducer, and the rotor speed is set in three working gears. The milling drum speed can be adjusted according to the working conditions, while meeting the requirements of crushing particle size

時，避免混合料離析，提高工作速度，使機器處于工作狀態;檔(大扭矩)，適用于高強度瀝青水泥穩定層破碎（碎石路基)等冷再生高負荷工況，I檔和Ⅲ擋適用于瀝青灰土路基冷再生等低強度路基冷再生，破碎粒度小，顆粒更細;

To avoid segregation of the mixture, increase the working speed and keep the machine in working condition; Gear (high torque), suitable for high-strength asphalt cement stabilized layer crushing (crushed stone subgrade) and other cold regeneration high load conditions. Gear I and III are suitable for low strength subgrade cold regeneration such as asphalt ash soil subgrade, with smaller crushing particle size and finer particles;

●·重型銑刨鼓經強化設計，采用焊接基座，可更換刀庫（齒套)，刀齒三件組合型式。刀庫（齒套）均為可拆式，刀齒與刀庫磨損

The heavy-duty milling and planing drum is reinforced with a welded base, replaceable tool magazine (gear sleeve), and a three piece combination of tool teeth. The tool magazine (gear sleeve) is detachable, and the tool teeth and tool magazine are worn out

后均可在現場快速更換，適應高強度的連續水穩路基冷再生施工;銑刨刀齒采用22型，使用壽命長，更耐磨損﹔銑刨鼓經動平衡調整,采用專用檢具檢測，裝配精度高，運轉平穩;

Afterwards, it can be quickly replaced on site to adapt to high-strength continuous water stable roadbed cold regeneration construction; The milling cutter teeth are of type 22, which has a long service life and is more wear-resistant. The milling drum is adjusted for dynamic balance and tested with specialized inspection tools, resulting in high assembly accuracy and smooth operation;

●·機器行走設有三個檔位，水穩路基冷再生采用行走I檔，行走速度控制準確，高負荷工況操控方便，灰土路基冷再生采用行走Ⅱ

The machine has three gears for walking, and the cold regeneration of the water stabilized roadbed adopts the walking I gear, with precise speed control and convenient operation under high load conditions. The cold regeneration of the gray soil roadbed adopts the walking II gear

檔,更大的速度調節范圍，行走III檔用于機器轉場;

Gear, larger speed adjustment range, walking in gear III for machine transfer;

●·全電控雙方向盤操作系統，圖形數字顯示多種工作參數，操控準確方便，機器可方便靠左側或右側貼邊施工;

● Fully electronically controlled dual steering wheel operating system, with graphical and digital display of various working parameters, precise and convenient operation, the machine can be easily operated by pressing the left or right side edge for construction;

●·添加劑噴灑（噴水）采用電控自動調節，自動控制與手動控制可自由切換，控制方便，準確可靠，可隨機器的行走速度自動調節

Additive spraying (water spraying) adopts electronic control automatic adjustment, which can be freely switched between automatic control and manual control. The control is convenient, precise and reliable, and can be automatically adjusted with the walking speed of the machine

噴水流量，停車自動停止噴水;

Spray water flow rate, automatically stop spraying water when parking;

●·餃接車身轉向與轉向后橋相配合，轉向靈活，后橋具有一鍵自動回中功能，無論后橋轉向位于何種角度，均可一鍵操作后橋轉向

The dumpling body steering is coordinated with the steering rear axle, providing flexible steering. The rear axle has a one click automatic centering function, allowing for one click operation of the rear axle steering regardless of its angle

自動回中，大大降低操作人員疲勞強度，提高工作效率;

Automatic centering greatly reduces operator fatigue and improves work efficiency;

●·雙橋四輪驅動，配以人字輪胎，驅動力強勁，適應各種路況作業;

● Double axle four-wheel drive, equipped with herringbone tires, strong driving force, suitable for various road conditions and operations;

●·加壓液壓油箱配以德國進口吸回油濾油器，經過多年的使用驗證考核，是可靠的濾油系統，可長期保持液壓系統的清潔度，是液

The pressurized hydraulic oil tank is equipped with a German imported suction oil filter. After years of use verification and assessment, it is a reliable oil filtering system that can maintain the cleanliness of the hydraulic system for a long time. It is a liquid

本文由冷再生機租賃友情奉獻.更多有關的知識請點擊:http://kqj188.com真誠的態度.為您提供為多維度的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to the rental of cold recycling machines. For more information, please click: http://kqj188.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned